| Portable ESS Specification | |
| Input Power 1 | Wind Generator & PV |
| Input Power 2 | AC 100V |
| Battery Type | Lithium ion |
| Charging Voltage | DC 42V |
| Capacity | 6KWh (500Wh Pack 12ea) |
| AC Output Voltage | AC 100V |
| Maximum Output Power | 1KW |
| Charging Time | 7H (0.2C) |
| Set Charging Time | 24H (Late-night power use) |
| General Specification | |
| Communication | RS-232, CAN |
| Operation Temperature | 0°C ~ 80°C |
| Storage | SD Card (Max 512G) |
| Dimension (W * H * D) | 800mm * 650mm * 785mm |
| Weight | 60Kg |
| Operation Humidity | Max 85% |
| 1KW Charger Specification | |
| Dimension (W * H * D) | 200mm * 120mm * 430mm |
| Weight | 4.75Kg |
| Input Power 1 | AC 100V |
| Input Power 2 | AC 100V (Late-night power) |
| DC Output Voltage | DC 42V |
| Charging Speed | Max 1KW/H |
| Portable Battery Case Specification | |
| Dimension (W * H * D) | 148mm * 145mm * 395mm |
| Weight | 3.3Kg (Without Battery) |
| Material | Aluminum |
| Charging Voltage | DC 42V |
| Charging Speed | DC 250W/H |
| AC Output Voltage | AC 100V |
| AC Output Frequency | 50/60Hz |
| AC Output Power | 200VA |
| DC Output Voltage | DC 5V ~ 20V |
| DC Output Voltage | DC 50VA * 4 |
| 250W Charger Specification | |
| Dimension (W * H * D) | 360mm * 190mm * 275mm |
| Weight | 5.35Kg |
| Charging Voltage | AC 100V |
| DC Output Voltage | DC 42V |
| Charging Speed | DC 250W/H |
| 500W Battery pack Charging Time | 2H |
| 구분 (区分) |
천재지변으로 인한 정전시 비상 가동이 필요한 전기제품 (天災地変による停電時,緊急運転が必要な電気製品に) |
| 병원 (病院) |
이동식 간이 장비 외 (移動式簡易装備の外) |
| 편의점 (コンビニ) |
포스시스템 외 (フォースシステムの外) |
| 개인 (個人) |
가정에 구비한 개인용 산소호흡기 외 (家庭に備えた個人用酸素呼吸器外) |
| 재난대피소 (災害避難所) |
개인에게 휴대용 배터리팩 제공(휴대폰 충전용도 외) (個人に携帯用バッテリーパックの提供（携帯電話の充電用途外）) |
| Solar Inverter Specification | |
| PV Input & Charger Specification | |
| PV Voltage | DC 120V ~ 450V |
| Max. Power | 6,000Wp |
| Charging Current | 100A |
| Efficiency | 93% |
| AC Output Specification | |
| Output Voltage | 110V (L-N) 220V(L-L)AC ±5%, 1-phase |
| Output Frequency | 50/60Hz |
| Rated Output Power | 6KVA |
| Harmonics | <5%, Current THD |
| Transfer time | 20ms |
| Protection | over-load, short circuit, over/under voltage, over/under frequency |
| Battery Interface Specification | |
| Charging Voltage | DC 58.4V |
| Charging Current | Max. 100A |
| Material | CC - CV |
| Charging Mode | Max. 100A |
| Discharging Mode | CP |
| Battery Module Specification | |
| Chemistry | LiFePO4 |
| Voltage Range | 44.8V ~ 58.4V |
| Capacity | ≥75Ah*2 |
| Cell Balancing | ≤0.05V |
| Life Cycle | 3,000 (0.5C, DoD 100%) |
| Protection | over-charge/discharge, over-heat |
| General Specification | |
| Energy Storage Capacity | 10KWh |
| Rated Output Power | 6KVA |
| Operating Temperature | -20 ~ 50 °C |
| Humidity | DC 42V |
| Cooling | ≤90% RH (non-condensing) |
| Dimension (W * H * D) | Forced air cooling |
| Inverter Weight | 32Kg |
| Battery (5KWh *2) Weight | 76Kg |
| ESS Specification | |
| AC Normal/Acceptable Input voltage | 220V (L-N) |
| AC Output | 6KW, 110V(L-N) 220V(L-L) AC/60Hz |
| Output Waveform | True sinewave (THD < 5%) |
| PV MPPT Voltage | 120 ~ 450VDC |
| Battery Capacity | 10KWh |
| Battery Voltage | 51.2 VDC |
| Operating Temperature | -20 ~ 50 °C |
| Parallel operation | Max. 9 Units Available |
 | |
